FDC-2-RD

parameter configuration and performance description:

1 appearance: bullet proof and stab proof clothing is composed of outer jacket and protective layer (including protective sleeve) (if other materials are attached inside and outside the outer jacket, this part of materials shall be removed and then various performance tests shall be carried out, if not removed, this part of materials shall be taken as a part of protective layer for assessment of structure, weight, thickness, area and other indicators). The coat can be disassembled and washed, and the size of shoulder and waist can be adjusted. All materials of the protective layer shall be of the same specification and size, and the surface of the material shall be free of defects such as holes, deep pits, scratches, cracks, notches, edges and corners burrs. The same layer of material shall be even and uniform, and free of defects such as splicing, local bulges, wrinkles, etc. The specification and size of outer jacket and protective layer shall match, and the protective layer shall be firmly connected with outer jacket

It is sealed with a black protective cover that is light and water-proof, and the sealing edge is uniform.

The sheath material shall be water resistant and the hydrostatic pressure resistance shall be no less than 18kpa

The specification and size of outer jacket and protective layer shall match each other, and the protective layer shall be firmly connected with the outer jacket. Bullet proof and stab proof clothing shall have good air permeability and be easy to wear and take off. After wearing, it shall not limit the free movement of both arms and the movement of human body such as kneeling, bowing, jumping, squatting, running, pitching and turning.

2 protection area: the protection layer shall cover the main internal organs (including front, back and side protection) of the human body. The total area of the protection layer is 0.3m2

3 thickness of protective layer: the thickness of protective layer of level 2 bullet proof stab proof clothing is 16.5mm

4 weight of protective layer: the weight of protective layer of level 2 bullet proof stab proof clothing is 3.5kg

5 bullet proof performance:

Room temperature: at room temperature, use 79 type 7.62mm light submachine gun and 51 type 7.62mm pistol bullet (lead core) to carry out shooting test on the sample at a distance of 5m, the sample is not penetrated, and the depth of depression formed on the backing material is not more than 25mm

High temperature: after the high temperature test (55 ℃± 2 ℃, constant temperature for 4h), the samples shall be shot at a distance of 5m respectively within 15min, and the samples shall not penetrate; the depth of depression formed on the backing material shall not be greater than 25mm

Low temperature: after the low temperature (- 20 ℃± 2 ℃, constant temperature for 4h) test, the sample shall be shot at a distance of 5m within 15min respectively, and the sample shall not penetrate; the depth of the depression formed on the backing material shall not be greater than 25mm

Waterproof: immerse the sample in 0.5m deep water at normal temperature, leave it standing for 30min, take out the hanging water drop for 5min, and carry out shooting test at a distance of 5m, the sample will not penetrate; the depth of depression formed on the backing material is not more than 25mm

Damp heat: after the damp heat test (70 ℃± 2 ℃, 80% RH constant temperature and humidity 240h), place it for 24h under normal temperature, and carry out shooting test for the sample at a distance of 5m, the sample is not penetrated; the depth of the depression formed in the backing material is not more than 25mm

stab resistance test:

Normal temperature: under normal temperature, the falling body composed of standard test tool and counterweight is up to 2.4kg, the impact energy is 24J ± 0.5j, and the effective piercing angle is 0 ° and 45 °. The tip of the tool is not allowed to penetrate the sample

High temperature: after high temperature treatment (55 ℃± 2 ℃, constant temperature for 4h), a falling body composed of standard test tool and counterweight is up to 2.4kg, the impact energy is 24J ± 0.5j, and the sample is effectively punctured at an angle of 0 ° and 45 °. The blade tip is not allowed to penetrate the sample

Low temperature: after low temperature (- 20 ℃± 2 ℃, constant temperature for 4h), the falling body composed of standard test tool and counterweight is up to 2.4kg, the impact energy is 24J ± 0.5j, and the sample is effectively punched at an angle of 0 ° and 45 °. The blade tip is not allowed to penetrate the sample

Executive standard: in line with the standards of GA 141-2010 police bullet proof clothing and GA 68-2008 police stab proof clothing; our company provides the test report issued by the national security alarm system product quality supervision and Inspection Center (Beijing) security and police electronic product quality inspection center of the Ministry of public security.

Product process and materials:

The structure of the protective layer starts from the impact surface: 6 layers of dipping aramid machine weaving +23 layer high performance polyethylene weft cloth (4 layers of fiber orthogonal) +4 layer dipping aramid fiber cloth, +6MM thick foam sheet.


Copyright©2023 Jiangsu Redon Police Equipment Manufacturing Co., Ltd  Powered by: www.300.cn

Copyright©2023 Jiangsu Redon Police Equipment Manufacturing Co., Ltd

Powered by: www.300.cn

IPV6  Tags  Business license