consists of transmitter, cartridge, pressurization system and battery module, CS is used as tear agent, the length of the diffuser is 390 ± 1 mm, the diameter is 190 ± 1 mm,
the weight of the diffuser is 4050 ± 2 g; The content of effective components of tear is 1.17% ± 0.1% and the volume of liquid is 5.6 l ± 0.1 L.
There are two spray modes, jet mode and spray mode, which can be converted by controlling the valve at the transmitter port, when the wind speed is less than 2 m/s, the jet state is in the form of jet, the effective jet distance is more than 6 m and the effective time is more than 200 s, and when the wind speed is less than 2 m/s, the jet state is in the form of spray, the effective jet distance is more than 4 m, the effective time is longer than 200s, the Tear Dispenser Supports non-pressure filling, and the stability is tested by accelerated aging method. The sample is taken out after 3 days in a hot humid test chamber with a relative humidity of 95% ± 2% and 45 ° ± 2 ° , the product was put in-30 ° ± 2 ° and 55 ° ± 2 ° incubators for 24 hours, then the product was sprayed immediately.
The process was not disintegrated, leak-proof and burst-proof