+
  • 3(8).png

Cut-resistant neck brace

1、Appearance: the surface is flat and smooth, without defects such as no head, breakage, gap, open line, needle leakage, stains, and so on; 2、Structure: the protective structure from outside to inside in order: fabric + high strength fiber woven into the cut-proof layer + fabric;

Category:


Message

Technical parameters:

1、Appearance: the surface is flat and smooth, without defects such as no head, breakage, gap, open line, needle leakage, stains, and so on;
2、Structure: the protective structure from outside to inside in order: fabric + high strength fiber woven into the cut-proof layer + fabric;
3, cut-proof neck guard should withstand the knife pressure of 20N, blade speed of 20R/min, vertical neck direction for 5 cuts, the number of weeks of cutting is not less than 30 weeks, cut resistance factor ≥ 5;
4, top breaking strength: ≥ 2500N;
5, air permeability: air permeability ≥ 600mm / s;
6, PH value: ≤ 8.5;
7, color fastness:
7-1, alkali perspiration color fastness: ≥ 3 level
7-2、Color fastness to acid perspiration: ≥3 levels;
7-3, Water color fastness: ≥3 levels;
7-4, Dry rubbing color fastness: ≥ 3 levels;
7-5, color fastness to soap washing: ≥ 3;
8, formaldehyde content: not detected;
9, safety: no odor, no allergenic dyes.
10, Environmental adaptability: (-20 ℃ ~ +55 ℃) ± 2 ℃ conditions, cut resistance performance to normal temperature cut resistance;
11、Executive Standard: "GA 614-2006 Police Cut-Proof Gloves", "GB 18401-2010 (Class B)".


Copyright©2023 Jiangsu Redon Police Equipment Manufacturing Co., Ltd  Powered by: www.300.cn

Copyright©2023 Jiangsu Redon Police Equipment Manufacturing Co., Ltd

Powered by: www.300.cn

IPV6  Tags  Business license