Parameter configuration and performance description:
Lscan-r9 dangerous liquid detector is specially used for detecting flammable, explosive and corrosive liquids. By means of quasi-static CT technology, the permittivity and conductivity of the liquid to be tested can be determined to determine its flammability and explosiveness. The detector can distinguish liquid explosive, gasoline, acetone, ethanol and other flammable and explosive liquids from water, cola, milk, juice and other safe liquids without direct contact with liquids. When this method is used to detect liquid, the detector has nothing to do with the size of the container where the liquid is to be measured, and the air gap between the detector and the container will not affect the measurement results.
Types of dangerous liquid that can be detected: the detector can detect dangerous liquid including but not limited to: gasoline, diesel oil, kerosene, anhydrous ethanol, acetone, benzene, banana water, ether, dichloromethane, trichloroethylene, turpentine, toluene, xylene Dichloroethane, n-pentane, cyclohexane, carbon disulfide, methanol, isopropanol, nitromethane, paint, thinner, hydrochloric acid, etc.
a. Specification: 210 × 50 × 70mm;
b. Weight: < 200g (including battery);
c. Power supply voltage: 3V;
d. Working current: 270mA;
e. Power consumption: 0.8W;
f. Detection time: 1 second;
g. Operating environment: temperature: - 5 ℃ - 45 ℃, humidity: 0-95% RH (no condensation);
h. The maximum wall thickness of the detectable container: 8mm non-metallic container;
i. Effective distance between detector and side wall of vessel to be tested: within 3mm