rd

FDY3R-RD 

Parameter configuration and performance description:

1, material: 41 layers of high performance polyethylene fiber weft cloth (four layers of fiber orthogonal) +1 layer 5mm thick foam;

2 protection area: 0.27 ㎡

3. Protection level: 1-3

4 color: Police blue, camouflage

5 executive standard: in accordance with ga141-2010 police bulletproof vest. Our company provides the qualification test report issued by the special police equipment quality supervision and inspection center of the Ministry of public security in 2013, and has the qualification certificate; product liability insurance: 1.5 million yuan, with the insurance period of 8 years.

Product features:

1. This bullet proof vest is flexible to wear and take off. After wearing, it will not restrict the free movement of two arms and the movement of kneeling, jumping, squatting, pitching and turning of human body. The coat of the bulletproof vest is suitable for the specification of the components of the bulletproof layer, which can be separated quickly. The components of the body bulletproof layer are marked with the bullet striking surface or the close fitting surface.

2. The outer coat of this bullet proof vest shall be free from damage, floating thread, needle leakage and other defects. The surface of the bulletproof layer material shall be free of defects such as holes, deep pits, scratches, cracks, notches, edge burrs, etc., the metal material shall be treated with rust prevention, and the non-metal material shall be even. The bulletproof material of the same layer shall be uniform, flat and uniform, without defects such as splicing, local uplift, wrinkles, etc. The bullet proof layer is composed of multi-layer bullet proof materials, and the specifications and dimensions of each layer are completely consistent. Soft bulletproof materials shall not be chemically and thermally bonded to the raw materials. The bulletproof layer structure and materials of the accessories of the bulletproof vest shall be consistent with the parts of the body bulletproof layer. There shall be clear and permanent product marks on the bulletproof vest. The position of the bulletproof vest marks shall be at the center of 10cm below the inner neckline of the back and on the bulletproof surface of the protective cover of the bulletproof layer. The contents of the bulletproof vest marks include: name of the manufacturer Scale or trademark, product name and code, product number, product specification, executive standard number, protection level, production date, production batch, validity, use instructions and precautions.

3. Performance of bullet proof layer protective cover material: the bullet proof layer protective cover is black, light proof and water-proof, with uniform sealing edge. The bulletproof layer protective sleeve material has the water penetration resistance, and the hydrostatic pressure resistance is ≥ 18kpa.

4. Protection area: the actual projection protection area of the body of the bullet proof vest is 0.27 ㎡; for the bullet proof vest with protection grade above 5, if the bullet proof insert plate is used, it shall be placed outside the bullet proof layer. The effective bullet proof size of the bullet proof insert plate is 250 mm × 300 mm, and the chamfer of four corners is less than or equal to 25 mm.

5 bullet proof performance: use the 1979 type 7.62mm light submachine gun and 1951 type 7.62mm pistol bullet (steel core) for test. Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depth of the back lining depression is 14.3mm.

6. Water resistance: at normal temperature, the bullet proof performance test shall be carried out after the bullet proof vest is immersed in water for 30min. In case of effective hit, the bullet proof vest shall block the warhead and the maximum depth of the back lining depression is 16.7mm.

7 environmental adaptability: a. the bullet proof performance test shall be carried out within 15 minutes after the high temperature test (55 ℃± 2 ℃, constant temperature for 4 hours). Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depression depth of the backing is 17.0mm. b. After the low temperature test (- 20 ℃± 2 ℃, constant temperature for 4h), the bullet proof performance test shall be carried out within 15min. Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depression depth of the backing is 15.7mm. c. After the damp heat test (70 ℃± 2 ℃, relative humidity 80%, 240h), the bullet proof performance test shall be carried out at room temperature for 24h. Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depth of the back lining depression is 14.4mm.

Product process and materials:

1, material: 41 layers of high performance polyethylene fiber weft cloth (four layers of fiber orthogonal) +1 layer 5mm thick foam;

2, structure: the bullet proof layer structure starts from the striking surface: 41 layers of high performance polyethylene fiber weft free cloth (4 layers of fiber orthogonal) +1 layer 5mm thick foam.

rd

FDY3R-RD05

Parameter configuration and performance description:

1 front panel:

Mass: 1.5kg protection area: 0.14m2 shooting distance: 5m

Shooting angle 0 °, left 30 °, right 45 °, 6 times in total, bullet proof vest not penetrated, backing material depression depth ≤ 25mm measured value 3-10 mm

2 back panel:

Mass: 1.34kg protection area: 0.12m2 shooting distance: 5m

Firing angle is 0 °, left 30 ° and right 45 °, firing 6 times in total, bullet proof jacket is not penetrated, and the concave depth of backing material is ≤ 25mm. The measured value is 4.2-11.7mm

Test basis: ga141-2010 police bulletproof vest

5 executive standard: in accordance with ga141-2010 police bulletproof vest. Our company provides the test report issued by the test and test center of the Institute of weaponry and equipment of China weaponry and equipment group and the quality supervision and test center of special products of China weaponry and equipment, and has the qualification certificate.

Product process and materials:

Material: the product is composed of outer jacket, protective layer and protective cover. The protective layer is made of 38 layers of aramid UD (surface density: 8.1kg / ㎡), 0.5mmpc and 7mmeva.

 

rd

FDY3R-RD06

Parameter configuration and performance description:

1, material: the bullet proof layer structure starts from the striking surface: 50 layers high performance fiber weft cloth (each layer of weft cloth is made up of 1 layers of aramid fiber and 1 ply polyethylene fiber), +3mm thick foam.

2 protection area: 0.30 ㎡

3. Protection grade: Class III, anti-79 type light submachine gun or 51 type 7.62mm pistol lead cartridge.

4. Color: Police blue, camouflage; weight: 3kg

5 executive standard: in accordance with ga141-2010 police bulletproof vest. Our company provides the quality supervision and Inspection Center for special police equipment of the Ministry of public security, the test and test center of the weaponry and equipment Research Institute of China weaponry and equipment group, and the quality supervision and test center for special products of China weaponry and equipment after 2015, with the certificate of conformity; product liability insurance: 1.5 million yuan, with the insurance period of 8 years.

Product features:

1. The main materials of the bullet proof layer of this bullet proof clothing are aramid weft free fabric and high-performance polyethylene weft free fabric. Reasonable combination of polyethylene fiber with light weight and UV resistance, aramid fiber has the advantages of small deformation after elasticity, excellent bullet proof performance, excellent bullet proof performance, flexible wearing, easy to wear and take off. After wearing, it will not restrict the free movement of two arms and the movement of kneeling, jumping, squatting, pitching and turning of human body. The coat of the bulletproof vest is suitable for the specification of the components of the bulletproof layer, which can be separated quickly. The components of the body bulletproof layer are marked with the bullet striking surface or the close fitting surface.

2. The outer coat of this bullet proof vest shall be free from damage, floating thread, needle leakage and other defects. The surface of the bulletproof layer material shall be free of defects such as holes, deep pits, scratches, cracks, notches, edge burrs, etc., the metal material shall be treated with rust prevention, and the non-metal material shall be even. The bulletproof material of the same layer shall be uniform, flat and uniform, without defects such as splicing, local uplift, wrinkles, etc. The bullet proof layer is composed of multi-layer bullet proof materials, and the specifications and dimensions of each layer are completely consistent. Soft bulletproof materials shall not be chemically and thermally bonded to the raw materials. The bulletproof layer structure and materials of the accessories of the bulletproof vest shall be the same as the components of the body bulletproof layer. The bulletproof vest shall have clear and permanent product marks, and the mark position of the bulletproof vest shall be 1 below the inner neckline of the back At the center of 0cm and on the surface of the bullet proof cover, the mark of the bullet proof vest includes: Manufacturer's name or trademark, product name and code, product number, product specification, executive standard number, protection grade, production date, production batch, validity, use instructions and precautions.

3. Performance of bullet proof layer protective cover material: the bullet proof layer protective cover is black, light proof and water-proof, with uniform sealing edge. The bulletproof layer protective sleeve material has the water penetration resistance, and the hydrostatic pressure resistance is ≥ 18kpa.

4. Protection area: the actual projection protection area of the body of the bullet proof vest is 0.3 ㎡; for the bullet proof vest with protection level above 4, if the bullet proof insert plate is used, it shall be placed outside the bullet proof layer. The effective bullet proof size of the bullet proof insert plate is 250 mm × 300 mm, and the chamfer of four corners is less than or equal to 25 mm.

5 bullet proof performance: use the 1979 type 7.62mm light submachine gun and 1951 type 7.62mm pistol bullet (lead core) for test. Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depression depth of the backing ≤ 25mm.

6. Water resistance: at normal temperature, the bullet proof performance test shall be carried out after the bullet proof vest is immersed in water for 30min. In case of effective hit, the bullet proof vest shall block the warhead and the maximum depth of the back lining depression shall be ≤ 25mm.

7 environmental adaptability: a. the bullet proof performance test shall be carried out within 15 minutes after the high temperature test (55 ℃± 2 ℃, constant temperature for 4 hours). Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depression depth of the backing ≤ 25 mm. b. The bullet proof performance test shall be carried out within 15 minutes after the low temperature test (- 20 ℃± 2 ℃, constant temperature for 4 hours). Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depression depth of the backing shall be ≤ 25 mm. c. After the damp heat test (70 ℃± 2 ℃, relative humidity 80%, 240h), the bullet proof performance test shall be carried out at room temperature for 24h. Under the condition of effective hit, the bullet proof vest shall block the warhead, and the maximum depression depth of the backing ≤ 25mm.

Product process and materials:

1, material: the bullet proof layer structure starts from the striking surface: 50 layers high performance fiber weft cloth (each layer of weft cloth is made up of 1 layers of aramid fiber and 1 ply polyethylene fiber), +3mm thick foam;

2, structure: the bullet proof layer structure starts from the projectile surface as follows: 50 layers high performance fiber weft cloth (each layer of weft cloth is made up of 1 layers of aramid fiber and 1 layers of polyethylene fiber orthogonal composite production) +3mm thick foam.

 

rd

FDY-5R-RD

Parameter configuration and performance description:

1. Material: the armor coating is made of 38 layers of aramid UD (surface density: 8.24kg/), 0.5mmPC and 7.0mm foam.

2. Full protective bulletproof clothing includes insert plate, front plate, back plate, shoulder protection, neck protection, crotch protection and waist protection. The protective layer of bulletproof vest is made of 38 layers of aramid UD (surface density: 8.24kg/), 0.5mmPC and 7.0mm foam. The insert plate is made of 6.0mm alumina and 8.00pe.

3. Weight of bullet proof vest: 5.02kg (± 0.02kg)

4. Mass of bullet proof insert plate: front plate 2.04kg, rear plate 2.03kg

5 bulletproof insert plate: 0.07 ㎡ for the front and 0.07 ㎡ for the back

6. Bullet proof vest: 0.06 ㎡ in front and 0.06 ㎡ in back

7 at room temperature:

(1) Shooting distance: 15m, shooting angle: 0 °

(2) Warhead speed: 737m / s-745m / s for the front piece, 740m / s-745m / s for the rear piece, shot situation: not penetrated

(3) Backing material depression depth ≤ 25.0mm

8. At high temperature (55 ℃± 2 ℃, constant temperature for 4h):

(1) Shooting distance: 15m, shooting angle: 0 °

(2) Warhead speed: front piece 737m / s-743m / s, rear piece 738m / s-743m / s, shot situation: not penetrated

(3) Backing material depression depth ≤ 25.0mm

9 immersion resistance (in 0.5m deep water, standing for 30min):

10. Shooting distance: 15m, shooting angle: 0 °

11. Warhead speed: front piece 735m / s-741m / s, rear piece 738m / s-742m / s, shot situation: not penetrated

12. Backing material depression depth ≤ 25.0mm

13 executive standard: in accordance with ga141-2010 police bulletproof vest. Our company provides the test report issued by 2016 China weaponry and equipment Research Institute test center and China weaponry and equipment special product quality supervision and testing center, and has the certificate of conformity; product liability insurance: 1.5 million yuan, with the insurance period of 8 years.

Product process and materials:

1. Material: the armor coating is made of 38 layers of aramid UD (surface density: 8.24kg/), 0.5mmPC and 7.0mm foam.

2. Structure: full protective bullet proof clothing includes insert plate, front plate, back plate, shoulder protection, neck protection, crotch protection and waist protection.


Copyright©2023 Jiangsu Redon Police Equipment Manufacturing Co., Ltd  Powered by: www.300.cn

Copyright©2023 Jiangsu Redon Police Equipment Manufacturing Co., Ltd

Powered by: www.300.cn

IPV6  Tags  Business license