Remote electric shock gun

Model

TX200P

Technical Specifications

I. Main Technical Parameters 
1. Structural Composition: The riot control device is equipped with mechanical sight, laser sight, safety switch, auxiliary function switch, display screen, trigger, electric shock button, and battery unlock button. The device features firing capabilities for three types of magazines: electric shock rounds, tear gas rounds, and restraint rounds, allowing simultaneous loading of two rounds in any combination.
2. Weight (including battery): ≤500g 
3. Dimensions: 202±5mm × 110±5mm × 45±5mm (L*W*H) 
4. Battery charging and indicator function: Rechargeable lithium battery with rated capacity of 1400mAh and voltage ≥7.4V; charging status is indicated by an indicator light.
5. Data functionality: Features electric shock data recording and download capabilities, including the product unique serial number, time of shock, duration of shock, and number of shocks.
6. Magazine switching: When the safety switch is open, close the safety switch and restart it within 3 seconds to switch the magazine for subsequent firing.
7. Laser Aiming: The main body of the riot control device features green and red lasers positioned below the muzzle. When unloaded, only the green laser is activated. After loading ammunition, both green and red lasers illuminate simultaneously, with the red laser operating in strobe mode to indicate the current loading phase. The green laser's aiming point corresponds to the upper flying needle of the electric shock projectile, while the red laser's aiming point aligns with the lower flying needle.
8. Shock mode: Features long-range and short-range shock modes. Single shock mode: Pressing the trigger activates the single shock mode, with a duration of 5 seconds; it can be paused at any time between 1 and 5 seconds.
10. Maximum range: ≥6 meters.
9. Discharge cycles: The standard discharge cycles for a single 5S unit shall be ≥430 cycles.
10. Overall waterproof performance: Rated IPX7 waterproof rating.
II. Technical Parameters of Electric Shock Bomb 
1. Mass: ≤45g 
2. Dimensions: 70mm±2mm × 66.2mm±2mm × 14mm±2mm [length×width×thickness (L×W×T)] 
3. Wire strength: Tensile strength ≥6N 
4. Target engagement distance: Average spacing of 26.5±0.5cm at 3m distance, 41.5±0.5cm at 5m distance 
5. Pulse frequency: 19±1Hz (tested under 500Ω and 1000Ω load conditions) 
6. Average output current: <1.0mA (tested under 500Ω and 1000Ω load conditions) 
7. Electric shock incapacitation level: Level 4 during standard 5-second shock duration.
III. Technical Parameters of Tear Gas Canisters 
1. Mass: ≤50g 
2. External dimensions: 70mm±2mm × 66.2mm±2mm × 14mm±2mm [length × width × thickness (L×W×T)] 
3. Initial launch velocity: Initial velocity at the nozzle outlet ≥70m/s.
4. Spray range: Maximum spray range ≥6 m.
5. OC content in tear gas: The tear gas used in the tube is OC agent with capsaicin content>1.5%.
6. Spiciness of tear gas: ≥250,000 SHU.
IV. Technical Parameters of Constrained Rocket 
1. Mass: ≤50g 2. Dimensions: 70mm±2mm × 66.2mm±2mm × 14mm±2mm [length × width × thickness (L×W×T)] 
3. Initial launch velocity: Initial velocity at the nozzle outlet ≥50m/s.
4. Rope strength: ≥800N 5. Effective range: When firing one restraint projectile at the upper and lower body of a mannequin from distances of 3m,5m, and 7m respectively, the projectile can instantly wrap around and bind the target.