Remote electric shock gun

Model

TX100P

Technical Specifications

I. Physical Properties 
1. Appearance: The surface shall be smooth without defects such as scratches, wear, burrs, oil stains, deformation, or cracking.
2. Weight: ≤330g (including one battery, excluding electric shock projectile).
3. Structure: Composed of a shocker body, battery, electric shock projectile, gun sleeve, expansion device, and storage box. The body includes mechanical sight, green laser sight, LED lighting lamp, safety switch, auxiliary function switch, display screen, trigger, and battery unlock button. The electric shock projectile and battery are detachable.
4. Size of the electric shock device (including battery but excluding shock projectile): ≤160mm±5mm (length) x 110mm±5mm (height) x 40mm±5mm (width).
5. Product Identification: The main body features a laser-engraved unique product serial number.
6. Shooting range (standard distance electric shock projectile): Under normal operating conditions, the electric shock projectile can achieve a flight distance of up to 7 meters when firing needles.
7. Accuracy: When firing 5 shots from 7 meters, all targets were hit with a 100% accuracy rate.
8. Propulsion force: Utilizes high-pressure compressed gas as the driving force.
9. Flying needles: Each electric shock projectile contains 2 flying needles with a length of 37.5 mm and barbed tips, featuring a span angle ≤5° between the needles.
10. Needle span during flight: Under normal operating conditions, the firing distance is 5 meters, with one shot fired. The vertical span of the electric shock projectile is 39±1 cm.
II. Electronic Performance 
1. Charging battery voltage: 8±1V.
2. Output voltage: 55±5KV.
3. Pulse width: 30±5μS.
4. Pulse frequency:>20Hz.
5. Single-pulse charge: ≤70μC.
6. Single pulse energy: ≤0.04 J.
7. Single shock control duration: 5.0 seconds.
8. Open-crawling arc distance: 36 mm ± 0.5 mm.
9. Single-cell battery discharge cycles: ≥455 cycles (each complete discharge lasting 5 seconds).
III. Environmental and Mechanical Properties 
1. High-temperature operation: After continuous exposure to an environment of 55°C ±2°C for 2 hours, the device was removed and tested within 2 minutes, demonstrating normal functionality.
2. Low-temperature operation: After continuous placement in an environment of-40°C ±2°C for 2 hours, the device was retrieved and tested within 2 minutes, demonstrating normal functionality.
3. Overall waterproof rating IPX7: When the electric shock device (including battery) is powered off and submerged below 1m water depth for 30 minutes, no visible water ingress is observed upon removal, with all functions operating normally. The waterproof rating is IPX7.
4. The equipment has an IPX5 dustproof rating.
5. Electrostatic immunity: withstand contact discharge at 4 kV and air discharge at 8 kV, with all functions operating normally.
6. Drop test reliability of the entire unit: The unit was dropped from a height of 1.8 m onto a cement floor, tested in three configurations—flat placement, tail-down orientation, and top-down orientation—with each test conducted once. No visible cracks or fractures were observed post-drop, and all functions remained operational as intended.
IV. Functions 
1. Electric Shock Function: Features both long-range and short-range electric shock capabilities.
2. Mechanical aiming: Equipped with mechanical aiming structures such as sights and notches.
3. Laser aiming: Equipped with green laser-assisted aiming, the laser beam irradiates at a distance of 10 meters with a spot diameter of 0.8 cm.
4. LED auxiliary lighting: Equipped with LED auxiliary lighting, featuring a lumen value of 52.2LM and an illuminance of 2901LX at 1-meter distance, it can meet auxiliary lighting requirements in nighttime or low-light environments, with a nighttime illumination range extending up to 10 meters.
5. Safety Switch: Both sides of the handle are equipped with safety switches to prevent accidental discharge and facilitate operation with either hand. Activating the safety switch enables normal working state, while deactivating it maintains the device in the closed state.
6. Continuous electric shock protection: After three consecutive complete electric shocks totaling 15 seconds, the product enters a protected state and the electric shock function cannot be activated again. The protection state can be lifted by restarting the fuse switch.
7. Display screen function: Equipped with a built-in display screen capable of showing normal operating status and electric shock status.
8. Shock countdown: During the electric shock procedure, the display screen features a 5-second countdown sequence "5-4-3-2-1-0".
9. Product Unique Serial Number Query Function: The product display screen features a unique serial number query function.
10. Electric shock data recording and download: Features electric shock data recording and download capabilities, including the product unique serial number, time of shock, and duration of shock.
11. Single-handed loading capability: Equipped with a dedicated electric shock cartridge sleeve to enable rapid single-handed loading; 
12. Battery charging and status indication: The rechargeable lithium battery displays a red charging indicator light during charging, and switches to green upon full charge.